Detailed introduction
JUKI New Modular Mounter RX-6
Brand new Modular Mounter RX-6 debut
-Combine High Productivitiy, High Flexiblity, High Quality
>Chip
42,000CPH(Optimum)*1
26,000CPH(IPC9850)
> IC
14,000CPH*1*4
>0402mm(01005 inch)~50mm*2
0402mm(01005 inch)~100mm/50×180mm*3
>Laser recognition : ±0.04mm(±Cpk>=1)
>This is applicable to dual-lane production.
>Compact footprint : the width is just 1.25m
>Equipped with standard Placement Monitor check function.*2*4
>Replaceable head allow you to configure a production line best suited to the current repirments.
>High-speed component placement using high-speed non-stop vision recognition
>Wide range of components and boards: tall components, large components and large boards.
>Brand new Matrix Tray Sever TR8S improves the component capability and productivity.
*1 when using 6 × 6 nozzle head
*2 when using 6 nozzle head
*3 when using 3 nozzle head
*4 Option for RX-6
|
High-Speed Compact Modular Mounter RX-7 |
|||
P16×P16 |
P16×P8 |
P8×P8 |
||
Board size |
Single lane conveyer |
50×50~360mm×450mm |
||
Dual lane conveyer |
50×50~360mm×250mm |
|||
Component height |
3mm |
3mm |
10.5mm |
|
10.5mm |
||||
Component size |
0402~5mm |
0402~5mm |
0603~25mm |
|
0603~25mm |
||||
Placement speed(Optimum) chip |
CHIP |
75,000CPH |
54,900 CPH |
34,800 CPH |
IC |
|
6,400 CPH 1 |
12,800 CPH |
|
Placement accuracy |
CHIP |
±0.04mm(Cpk>=1) |
||
IC |
- |
±0.04mm |
||
Component loading quantity |
38 (76 in case of 8mm tape) 2 |
>1 This is applicable only to the P8 nozzle head.
>2 When a double lane feeder is used.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
>1 This is applicable only to the P8 nozzle head. |